1914 Erfurt wont chamber a round

Somewhere between one and a trillion dollars.

Realistically $50-$100 but probably not even that much. You’ll probably spend more in shipping.

Normally I don’t like work like this because the logistics takes more time than the work, and it’s a net loss. If you were local it’s an easy thing to take care of.

In theory any gunsmith should be able to correct this with minimal effort, but these days . . . .
 
I really really appreciate the offer. I'm gonna talk to a local gunsmith and see what he says (Just to avoid all the shipping stuff if poosible). If he doesn't seem confident I'll ship it out.

Also just for grins does anyone have the bolt measurements?
 
I recently acquired 2 mausers. One is a very well marked Yugo. It even says 8mm on the barrel and chambers the Turk surplus ammo that came with them just fine. The other mauser has no markings other than the matching serial numbers and some sort of circle cross stamp on both the receiver and the bolt. It will not chamber an 8mm round. Out of curiosity, and lack of other mauser ammo, I tried a 7.62 X 51 round, and it chambers perfectly.
I only chambered it out of curiosity, and know nothing about the rifle. Perhaps someone knows what the circle cross markings are?
 

Attachments

  • 20250321_152408.jpg
    20250321_152408.jpg
    168.7 KB · Views: 8
  • 20250321_152349.jpg
    20250321_152349.jpg
    174.7 KB · Views: 8
Magnum2230 said:
I recently acquired 2 mausers. One is a very well marked Yugo. It even says 8mm on the barrel and chambers the Turk surplus ammo that came with them just fine. The other mauser has no markings other than the matching serial numbers and some sort of circle cross stamp on both the receiver and the bolt. It will not chamber an 8mm round. Out of curiosity, and lack of other mauser ammo, I tried a 7.62 X 51 round, and it chambers perfectly.
I only chambered it out of curiosity, and know nothing about the rifle. Perhaps someone knows what the circle cross markings are?
Click to expand...
Is there any other writing on the barreled receiver anywhere? Have you taken it out of the stock? Looks like a Spanish proof mark? Might be 7x57
 
Last edited:
biggymu said:
Is there any other writing on the barreled receiver anywhere? Have you taken it out of the stock? Looks like a Spanish proof mark? Might be 7x57
Click to expand...
looks like the mark of La Coruna arsenal in Spain, but not a model 98, perhaps an Model 1916? (small ring?) could be 7x57……
 
Yes I believe it is a 1916, and I have just noticed when I removed the cleaning rod, that the underside of the barrel is marked Spanish M1916, but double struck, so pics are hard to read, then under that mark is SAMCO MIAMI FL .308W
I don't have a bayonet for that one, but my Yugo in cosmoline, came with two that fit it just perfectly, one also in cosmoline, one not in cosmoline.
 

Attachments

  • 20250325_090344.jpg
    20250325_090344.jpg
    176.9 KB · Views: 1
I only jumped into the conversation because the Spanish rifle would not chamber the 7x57 round, nor the 8mm round, but when I tried a 7.62mm round I had here, it went right in no trouble at all. But it was only this morning I noticed the 308W stamp on the underside of the barrel.
 
You must log in or register to reply here.
Back
Top