Third Party Press

Need estimated value on g24t mismatch

G

Gunnut

Well-known member
May have to sell my mismatched g24t, and have no idea of what to ask for it. It is in a vz24 stock as I believe it should be, but not modified. It is a b block with a vz24 Romanian contract bolt and mirror bore. Any suggestions?
 
The G24t did not (with the possible exception of some of the first blank receiver variants) use the same stock as the VZ-24. They are similar but the G24t stock will have the stock cut for the slide mount sling and have German markings.
If it is in a regular VZ-24 stock that would hurt value more than a mm bolt in my opinion.
 
runner said:
The G24t did not (with the possible exception of some of the first blank receiver variants) use the same stock as the VZ-24. They are similar but the G24t stock will have the stock cut for the slide mount sling and have German markings.
If it is in a regular VZ-24 stock that would hurt value more than a mm bolt in my opinion.
Click to expand...
Yes thats why I said it was not modified with the sling cut out, bolt take down tube and lower sling loops removed. With all the issues it doesn't sound like it's worth enough to worry about trying to sell.
 
RC K98k’s sell regularly for $800+, A G24t, even with issues is much harder to find. I bought one a couple years ago that was in a VZ-24 stock, but had a matching bolt, found a correct stock on eBay that was being sold as a VZ-24 stock
 
You must log in or register to reply here.

Military Rifle Journal
Back
Top