MAUSER G24t DOU41

Hello All !
Can u help me about this G24t DOU41 please , i will buy iterm .
This bolt can be good for this model , number 8669 c ?
Why his number isn't at the good place ?
Thanks for your help ,
Best Regards,
Willy from France

( sorry for my bad english )
 
Some pictures about this rifle
 

Attachments

  • 600h600f_00003_carabine-Mauser-G-24T-fabrication-dou-41-calibre-8-x-57Js.jpg
    600h600f_00003_carabine-Mauser-G-24T-fabrication-dou-41-calibre-8-x-57Js.jpg
    27.3 KB · Views: 31
  • 60_00004_carabine-Mauser-G-24T-fabrication-dou-41-calibre-8-x-57Js.jpg
    60_00004_carabine-Mauser-G-24T-fabrication-dou-41-calibre-8-x-57Js.jpg
    1.2 KB · Views: 31
  • 60_00005_carabine-Mauser-G-24T-fabrication-dou-41-calibre-8-x-57Js.jpg
    60_00005_carabine-Mauser-G-24T-fabrication-dou-41-calibre-8-x-57Js.jpg
    1.2 KB · Views: 31
  • 60_00001_carabine-Mauser-G-24T-fabrication-dou-41-calibre-8-x-57Js.jpg
    60_00001_carabine-Mauser-G-24T-fabrication-dou-41-calibre-8-x-57Js.jpg
    1 KB · Views: 32
Sorry for the bad pictures , i can't do more good quality ...
Why serial number ( matching with receiver ) isn't on along the bolt arm ?
They do itel like a K98 !
 
The last 3 pictures are 1,2kB large so You download only thumbnail not the picture, the picture of receiver is only 23kB but something is there visible already. The bolt when not matched is a missmatched then.
 
AndyB said:
Les 3 dernières images font 1,2 Ko, vous ne téléchargez donc que la vignette, pas l'image, l'image du récepteur ne fait que 23 Ko mais quelque chose y est déjà visible. Le boulon, lorsqu'il ne correspond pas, est alors mal assorti.
Click to expand...
Quand j'aurai ce fusil, je ferai de meilleures photos, je n'ai que celles de l'armurier.
You think the bolt will be ok ? not all the bolt have only numbers along arms ? i'm little afraid about a fake !
 
When serialed to the gun and eagle proofed it could be ok, wout real photos nothing more to say.
 
AndyB said:
Une fois en série sur le pistolet et à l'épreuve de l'aigle, cela pourrait être ok, sans vraies photos, rien d'autre à dire.
Click to expand...
Ôk , When i receive this rifle at home , i send you more pictures......Thank tou very much for all !
 
The bolt is probably force matched on base of bolt handle, normally a G24(T)is marked on stem of handle when i remember corectly.
 
AndyB said:
Le boulon correspond probablement à la force sur la base de la poignée du boulon, normalement un G24 (T) est marqué sur la tige de la poignée si je me souviens bien.
Click to expand...
Yes , it's that my problem ! i don't know if a few model was do like that ?
 
You must log in or register to reply here.
Back
Top