oldwing

Align the two parts (red circle)

Confused here, the serial number 75235 would put this rifle in the first es340 or possibly the first es350 series, not the es350b rifle...

You are welcome. I was double checking my measurements before reassembling and found the tip of the firing pin has a very slight slant...

Few morethe pin is round with the sear being finished rectangular

Here should be some photos and measurements of the firing pin of my Wenzel.

falcon007, the bolts of my el24 and my Wenzel look similar externally but firing pins definitely will not interchange. I’ll get mine...

https://www.gunbroker.com/item/1072729077 This is why I was inquiring about how the sight installed. On the es340b, there are cuts in...

I will measure on mine and let you know.

Rather than a new thread I think my question would fit here. I have had several es350b rifles and the grooves of the receiver and the...

Banners...another topic that would probably need another thread.

Well… in reviewing your photo of the late banner I find that the banner on my grooved es340n seems to be different from your banner! Ps...

Oldwing, I was probably making some measurements while you posted. Comparison between MS420N and MS420N "Grooved" (higher s/n is on the...

Eurydice, thanks, I had not noticed the difference in the banners and probably would not have . My rifles show the different banners...

Eurydice, I was not getting an accurate measurement with the rifle in the stock. From the measurements with the action removed I find...