Search results

I finally got my stock from Murrays today. Anyone that has read some of my others posts know that this was a long time coming. The stock is laminate just as I wanted. You can also get them in walnut if you wish. The stock will require some fitting to get the AC44 that I have for it to slide in...

I just picked up this receiver. It is a BCD code (a code I didnt have yet). I have a very good barrel that will be pressed in and head spaced. I already have 90% of the parts to complete it sitting in my parts bin. Every last G/K43 that I have built I have said that it was my last but here I am...

For all of the fake SS rifles out there........You are 100% Frankenberry Approved!!! I couldnt help myself. I saw a photo of Frankenberry today so I just had to put a K98 in his hands :ROFLMAO::LOL:

For those looking for an oversized front sight base for their G/K43, Frontline will make them if they get enough pre-orders. They will go into production if they can get 20 orders. I have orders in for 3 of them.

I don't know if this has ever been discussed before. I never really noticed it before but there are different sized front sight bases. I have a G43 that someone buggered up the slot for the front sight blade. No problem I thought, I will just get another one and install it. I had a repro in the...

I just thought I would tip any of you off that might be considering picking up a bare bolt from AASSniper. Don't bother, I ordered on and it came in and it is demilled. The bolt face has been cut with a saw and also spot welded. I took a chance one buying one and the gamble didnt pay off.

I along with many people have gotten G/K43 stocks from Fox in Poland. His wait time is almost a year. I don't have the patience anymore to wait that long to get a project done so I went out looking for another source. I found Murrays Gun Stocks in Oregon. I made an order tonight for a laminate...

I am thinking that when the G/K43's were assembled, that they used various sized pins. I am building two shooters currently and I am finding that slightly different sized pins were used for the gas block, rear sights, front sights from rifle to rifle. I tried to use the same size pin for gas...

Step right up, step right up. You can have this piece of crap for the low price of $1500!!!! Are they out of their minds putting an asking price for this piece of scrap metal? It would take a ton of work getting this thing back into order to look half decent. I am all for saving G41, G/k43s but...

All of a sudden I am getting a notification that I dont have sufficient privileges to respond in the Trader section. I have been in good standing for 11 years on the forum. Not quite sure what the issue is???

I bought a barreled receiver from a forum member. It has a cut 30 caliber barrel. I have an original Waa214 8mm barrel for it and had a bin of K43 parts so off to Rob Applegate it went today for the barrel swap. I said I wouldn't do another one of these projects but here I am. The stock is an...

Does anyone know what size all of the pins are for the G/K43 trigger group (magazine catch, hammer, sear, trigger) are? I dont want to have to tear down one of my other rifles to put a micrometer on them. I have a project that needs the pins and need to know what sizes to look for so I can...

What was this butcher thinking to create such a monstrosity???

I have a friend that has a Czech bayonet that was modified by the Germans. It has the typical ring ground down and deep blue finish. It has what I believe is a unit marking 4/233 Any idea what the marking means? Thanks!

I got this barreled receiver from a forum member a while back. It had what I thought was a 30-06 barrel installed but it was actually a .270 barrel. I located an original 8mm barrel and sent it out to Apfeltor and he did the swap. She didn't turn out too bad and is an excellent shooter.

I bought an original G43 stock for one of my project shooters. I got it for a great price due to the issues that it had. It has been chopped down about 2 inches and the bottom was contoured for a flat butt plate. I first tried cutting out a small part of the bottom of the stock and attached a...

I put a post in the trader section as well. I have an original G43 stock that someone cut down at the butt end. I am looking for a 1 1/2 section so I can splice it back on and have the proper length stock. I have attached 2 photos so you can see what is missing. I am wondering if a K98 cupped...

So today I went to visit one of the guys that I worked with on the railroad. He has been retired for a few years now. As we were talking about the good old days, he said "i'll be right back". He came back with a small box and told me that he wanted me to have something. This box was full of...

I bought some original G43 parts and they arrived today in from the Netherlands. Exactly what my projects needed. Sorry, none are for sale.

What do you folks think is a fair price for a G43 milled housing in this condition? I dont know what to offer for a milled housing. I am more familiar with the going rate on a stmaped housing. Thanks