Search results

It is pinned in place and it's likely not coming out easily. If the windage holds somewhat true at longer ranges, i might just live with it. Thanks.

Question about the front sight. The base seems to be slightly canted counter-clockwise. The post needs to be moved quite a bit to the right to achieve zero. Is this typical with these rifles out of the factory? With the witness marks lined up, the post is almost centered on the base so that...

I've been working on fine-tuning the gas system and adjusting the front sight. I made my own restrictor plug with a 1mm hole, which wasn't enough to cycle the action. I took a drill with the 1mm bit with me to the range, fired one shot, honed the plug, fired another and honed it again until i...

Took about 20 shots at the range today. The rifle cycled fine with the smallest plug and locked back every time on empty magazine. It threw the brass about 15ft away. I did have 2 hammer follow malfunctions. I couldn't replicate the issue when cycling by hand so perhaps it's slightly...

Will do. The previous owner had used the middle-sized plug with modern PPU bulk ammo. I swapped it to the smallest one for first shots. I'm definitely taking it easy on the round count too.

Hello all, I recently acquired this K43 rifle. It looks like it's been built out of 2 different rifles: 7113A and 1417A. Barrel and gas system are from former and seems like the rest is from the latter. Has an aftermarket gas system already installed. Original gas system and recoil springs were...