Third Party Press

1937 S/42 98K Matching SN's

M

Mauser35

Member
Hello All,
I've had what appears to be a numbers matching rifle handed down from my dad.. He acquired it from a congregation member who's brother had served in WW2. According to the congregation member the brothers unit was in a fire fight with some German soldiers and all the Germans were killed. The rifle was taken out of the dead soldiers hands, unfortunately "Duffle Cut" and shipped back to the US. Sounds like a good story but nothing to confirm it. The stock seems to be the roughest part of the rifle with a few larger gouges in the hand guard and just below that, as shown in the pictures. I bore scoped the rifling and it was in good shape, so I shot it. What's a gun for if you can't shoot it. They sure do have a ton of creep in these triggers. Any thoughts about the duffle cut, leave it like that for it's historical significance, or repair it? Any other comments would be welcomed about it's history or markings. By the way this site is a wealth of knowledge. Many thank you's for the participants that made this info possible!IMG_1879.jpgIMG_1828.jpgIMG_1829.jpgIMG_1830.jpgIMG_1831.jpgIMG_1832.jpgIMG_1833.jpgIMG_1834.jpgIMG_1835.jpgIMG_1836.jpgIMG_1838.jpgIMG_1839.jpgIMG_1840.jpgIMG_1841.jpg
 

Attachments

  • IMG_1878.jpg
    IMG_1878.jpg
    81.1 KB · Views: 12
You have a really nice original Mauser Oberndorf late 1937 with an early laminated stock.
Rig is totally original. While not mint, its in nice as found condition.

A very nice collectable K98k!

Also, the duffle cut does not detract from the value. That's my opinion.
As long as the cut is hidden behind the rear band, the rifle will retain its full value.
 
bruce98k said:
You have a really nice original Mauser Oberndorf late 1937 with an early laminated stock.
Rig is totally original. While not mint, its in nice as found condition.

A very nice collectable K98k!

Also, the duffle cut does not detract from the value. That's my opinion.
As long as the cut is hidden behind the rear band, the rifle will retain its full value.
Click to expand...
I'm curious about the duffle cut. Would you repair it or just leave it like it is? It needs about a 1/16" spacer to fill the kerf or the spring won't fit in the groove just before the bayonet holder.
 
Its totally up to you.
I still have a few non-repaired duffle cut rifles in my collection.
Maybe one day I'll get to it but not a priority.

B/
 
Zeppelin5000 said:
A lot of guys here will tell you not to shoot it being that it's a matching example. One broken part and it's value can diminish drastically. It's all up to you though. Many guys have mismatched shooters for shooting.
Click to expand...
I have shot 15 rounds through it so why push it. What would be a rough estimate of value for a rifle like this?
 
Last edited:
I’m always in favor of leaving a duffle cut. It’s as original as it’s ever going to be as is. Once you repair it is that much further away from original. My humble opinion. That said, you certainly have a beautiful example.
 
Welder1 said:
I’m always in favor of leaving a duffle cut. It’s as original as it’s ever going to be as is. Once you repair it is that much further away from original. My humble opinion. That said, you certainly have a beautiful example.
Click to expand...
Thanks, I value all of your expert options and will leave it as is. I like the history of it and it’s a conversation piece also.
 
the creeping trigger is by design, helps reduce accidental discharge. you can take up the slack & release it, without ‘half-cocking’ the action (which could lead to a ‘slam fire’) if you had the action out of the wood, you can see how the parts move against each other, it really quite clever. I’ve had some sporter rescues that were unsafe because someone modified the trigger lobes to reduce the ‘creep’.
 
Muncher 1953 said:
the creeping trigger is by design, helps reduce accidental discharge. you can take up the slack & release it, without ‘half-cocking’ the action (which could lead to a ‘slam fire’) if you had the action out of the wood, you can see how the parts move against each other, it really quite clever. I’ve had some sporter rescues that were unsafe because someone modified the trigger lobes to reduce the ‘creep’.
Click to expand...
I had carefully taken the action out to check for markings. I saw how it rocks from one lobe on take up to the other for firing. The toolmaker in me makes me curious. Thanks for sharing your knowledge.
 
You must log in or register to reply here.

Military Rifle Journal
Back
Top